CLASSIC® 300 MP ENGINE DRIVEN WELDER (PERKINS®)
Click To Enlarge

 

DC From the Start

The Classic 300 MP is powered by a hand-built pure DC generator from the only welding manufacturer providing this proven technology to the market. The all-copper windings and flat DC output ensure a smooth, stable arc that enhances arc control, helping operators keep defects to a minimum to avoid cut-outs and costly repairs.

 

5 Step Current Control

No two pipe joints are the same – hi-lo fit-up, out-of-round pipe and gap variations can challenge any bead hand to lay in a defect-free weld subject to 100% x-ray inspection. Getting those results requires tremendous control over the arc. The Classic 300 MP is equipped with a 5 step current control that used in conjunction with a fine tuning control allows for precise setting of Amps, Volts, and Slope for a digging, penetrating arc for root beads or a soft, buttery arc for stacking iron on the fill and cap passes.

Then you, or your helper using a remote control, can dial in the fine control to adjust heat input, or arc sensitivity, in response to fit-up
and orientation of the weld puddle on the pipe.

 

CA, WY, MS, MA,FL, TN subject to sales tax

CustomArc®

This control provides up to 150 RPM of engine speed adjustment to fine tune the heat input at the arc.

 

 

RATED OUTPUT
  • 300A DC/32V/60%
  • 250A DC/30V/100%
OUTPUT RANGE
  • 40-350A DC
GENERATOR OUTPUT
  • 3000 watts
TYPE OF ENGINE
  • Perkins 403F-15T Diesel EPA TIER 4
HP AND SPEED
  • 24.7@1800
CYLINDERS
  • 3
DIMENSIONS (H X W X D) 37.1 in x 24.3 in x 62.8 in (943 mm x 616 mm x 1594 mm)
NET WEIGHT 1371.00 (621.89 kg)

 

  • Item #: k4263-1
  • Manufacturer: Lincoln Electric
  • Manufacturer's Product Number: k4263-1

CLASSIC® 300 MP ENGINE DRIVEN WELDER (PERKINS®)

Price: $15,739.49
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review